• PG2 - Rain Gauge
    PG2 - Rain Gauge
    Products
Description

PG2 is the highest-performance tipping bucket rain gauge with 200 cm2 captation surface on the market today, it is certificable in class A according to the criteria of the UNI EN 17277:2020 standard. Accurate, it indicates any malfunctions before they cause interruption of measurement and it’s usable without a power supply also at low temperatures thanks to the heated raing gauge version: PG2/R.

PG2 measures liquid precipitation with an output resolution of 0.1 mm. The error of the PG2 product class is less than 3% up to 700 mm/h.

Unlike that guaranteed by the most popular sensors based on weight technology, PG2 measures with this degree of accuracy from the first minute following the phenomenon detected, thus being particularly suitable for the timely measurement of downpours.

PG2 contains diagnostics to verify the:

clogging of the funnel;
correct inclination of the sensor;
correct functioning of the sensing elements;
status of the moving parts, to warn in advance of potential breakdowns.

PG2 - Rain Gauge
Features
Connection with Data-logger Interface RS-485 with SDI-12 protocol
Installation Mast 48 mm Ø – available support for basement of concrete
Measurement Range up to 1200 mm/h
Output Resolution 0.1 mm
Collecting Area 200 cm2
Consumption @ 12,5V < 1mA
Accuracy Max 3% <700 mm/h
Max 5% 700÷1000 mm/h
Max 10% 1000÷1200 mm/h
Temperature Range 32 °F /140 °F (0 °C / 60 °C)
Sensor Type Tipping bucket rain gauge
Download
Download

Download Datasheet Rain Gauge PG2 & PG2R
Support
Support

Support tool for CAETech's products buyers

Log In
Zero breakdown technology

Technology

Mechanical robustness is guaranteed by:
  • -    the attention to detail, starting with the design phase;
  • -    encoded, tracked and certified production processes;
  • -    the use of high quality materials;
  • -    the experience and training of production engineers.
ZBT allows the risk of sudden failure and loss of data to be minimised, by using:
  • -    redundant elements, which make sure that, if an element breaks, the product sends an alert while operating normally, giving time to intervene with the replacement without losing any data;
  • -    diagnostic sensors of various types, such as the ones for the verification of:
    • o   the correct inclination of the product,
    • o   the quality of the acquired measurement,
    • o   the value of the voltage input,
    • o   the status of inputs and outputs,
    • o   the conditions of the internal temperature,
    • o   the reliability of the RF link between all devices,
    • o   etc.